Modes of Motion
- Point-to-Point Positioning
- Jogging
- Contouring
- Electronic Gearing
- Electronic Cam
Supported No. of Axes
Range of Motion Parameters
- Position: +/- 2147483648 Steps
- Velocity: 200 - 200 KHz Step Rate
- Acceleration: 40,000 - 40 Million Steps / sec2
Communication Interface
Software
General Specifications
- LED Power Indicator
- High Performance Line Filter
- Compact Industrial Enclosure
Joystick
- Single Handed 2 or 3-axis Control
- Motor Speed Proportional
to the Tilt Angle
- Three Speed Selection Keys
more
info...
- Long Life
Trackball
- Precision Positioning
picture
- Long Life
Mechanical
- Size: 10.0'' (250 mm) W X 10.8" (265 mm) D X 4.875"
(124 mm) H
- Weight: 10 lbs (4.50 Kg) with 80-Watt Power Supply
- Material: Aluminum, 0.09" (2.3 mm) Thickness
|
Dedicated Inputs
- Positive and Negative Limit Switches per Axis
- Home Switch per Axis
- CONTINUE, END, RUN, STOP, and UPLOAD-and-RUN for Stand-alone Mode
Operation
Dedicated Outputs
- 2-Phase Stepper Motor Driver Outputs per Axis; Motor PhA+, Motor PhA-,
Motor PhB+, and Motor PhB-
General Purpose Digital Input / Output
- 8 TTL / CMOS Inputs, Optional 16 TTL / CMOS Inputs
- 8 TTL / CMOS Outputs, Optional 16 TTL / CMOS Outputs
- Up to Five Optical Encoder Inputs
General Purpose Analog Input
-
3 Inputs
-
8 Bits of Resolution
-
Adjustable Gain
-
Offset Adjustment Potentiometer for each Input
Memory
- Up to 448 Kbytes of Non-volatile Memory
- 22 General Purpose Variables, 32 Bits of Resolution
- 7500 Bytes of Program Memory
Stepper Motor Driver
- Up to 7 Amps Phase Current
- 2 to 256 Micro-steps per Step Resolution
- Size 8 to 42 Motors
- Auto Current Reduction
DC and Three Phase Brushless
Motor Driver
- Up to 20 Amps Phase
Current
- LED Fault Indicator
Power Supply
- 80-Watt, +24 VDC at Full Load
- Optional 160-Watt, +36 VDC at Full Load
- Optional 240-Watt, +48 VDC at Full Load
- Optional 400-Watt, +48 VDC at Full Load
Power Requirement
- 110 VAC, 50 ~ 60 Hz or
- 220 VAC, 50 ~ 60 Hz or
- Optional +12 VDC to +80 VDC
|
